This site contains information on BMP Enterprises Projects
Wednesday October 21st 2020
###This site is under construction and over time will be updated with BMP Enterprises project information.###Click on links above to see overview material for each item.###Click on links in the Categories Section below left to see more component information and more recent posts.

‘Transmission Adapter Plate’ Archives

Making the Transmission Adapter Plate

Author : Administrator Published: January 2nd, 2010
Making the Transmission Adapter Plate

These are the steps used to create the adapter plate to attach and center properly the motor to the transmission. We started with a  3/4" 6061 aluminum plate and made an acrylic template that showed the bolt holes from both transmission and motor as well as the outlines. This kept us on track and helped make decisions. The next step was [...]

Transmission Adapter Plate

Author : Administrator Published: December 27th, 2009
Transmission Adapter Plate

Sizing up 3/4 inch Aluminum Transmission Adapter Plate with locating pin and marked acrylic sheet:

Latest Topics

Azure Dynamics (Solectria) 445TF UMOC Controller Testing Azure Dynamics »

My older son acquired an Azure Dynamics...

Current Waveform Investigation Current »

I measure all three phase currents today to...

Shutter/Jerking Current Waveform »

Attached is a picture of the filtered Phase...